Product technical specifications
1. The bluetooth version: CSR4.0
2. The frequency: 2402 MHZ to 2480 MHZ
3. The signal-to-noise ratio: > 95 db
4. Operating range: 10 meters (accessibility)
5. The battery capacity: 100 ma / 3.7 v
6. The operating environment: - 10 to + 50 ℃
7. The battery capacity: 110 mah
8. Time: 7 hours
9. Music broadcast time: 7.5 hours
8. Product size: 35 to 45 * * 12 mm
9: product weight: 52.2 G
EK201 is a bluetooth multifunctional audio receiver, can through the wireless bluetooth technology and the iPhone, iPod, iPod touch and other smartphone matching connection, EK201 by 3.5 mm AUX interface and the stereo, home theater, will the information such as wireless hands-free phones and wireless music on the stereo perfect show, bring you special sounds of nature.
Long press the multifunction button "" 3 seconds boot, boot immediately after in pairing, back to the state, the time for 3 minutes.More than 3 minutes, then to sleep.More than 12 minutes automatic shutdown.
To turn it off
Long press the multifunction button "" 3 seconds" EK201 "to turn it off.
The bluetooth pairing
EK201 boot after 3 minutes, cell phone bluetooth, search to EK201 device, click on the links to complete matching.If you need to enter pairing password please enter "0000".If pairing is not successful, then turned on again.If pairing is complete, but will phone music, voice, etc by EK201 3.5 mm audio broadcast head to the stereo, or other audio devices with AUX.
Music mode: pairing bluetooth connection is complete, short press the multifunction button "play music conditions, can play or pause music;
The volume/volume reduction
Long press buttons or keys to increase the volume or decrease the volume
A/the next song
Click on the buttons or keys to achieve the next song or a song;
When, after the completion of hands-free phones: pairing bluetooth connection telephone call trendy press the multifunction button to answer incoming calls.Call in the process, press the multifunction button to hang up, end call.
Telephone refused to: when the telephone call is fashionable, double click "multifunction button is rejected calls answered;"
The bottom number redial: after the completion of the bluetooth pairing connection, double-click the bluetooth key, you can replay the last time phone call on the phone.
Disconnect the bluetooth: long press for 3 seconds to turn it off, or turn off the phone bluetooth function.You can disconnect the bluetooth connection.
Bluetooth yituo 2: will the first paired phone bluetooth closed, turn off the EK201, then EK201 boot, the second mobile phone bluetooth search EK201, then connect the matching EK201, finally opened the first mobile phone has been connected.Such a EK201 equipment, completes the connection of two bluetooth mobile phone.The two bluetooth phone alternate through EK201 connect music or calls to EK201 the stereo, or wearing headphones, realize two cell phones or bluetooth master device, using EK201 together
Light pattern: EK201 has two lights a blue, a red.
Red light: charging indicator, charging the red light bright, full of red light, blue light;Flash for pairing and the back.
Blue light: after the completion of the bluetooth connection to work normally, once every 5 seconds flicker, calls flash once every 3 seconds.
Red and blue flashing: matching and back to even
Blue lights flash: calls and to call;
When the power is too low, EK201 makes a prompt, at this time should be recharge EK201.Remove the USB cable from the packaging, then connect the USB power supply for 5 v USB output, Micro USB connection "EK201" A head pin to complete charging.
Charging "EK201" red light, bright, when after the completion of the red light will go out.
Note: please use electrical outlets, as required.
Description: 1 PCS
Usb charging line: 1 PCS
3.5 mm to 3.5 mm audio line
Metal 3.5 mm to 3.5 mm audio connectors